Floor-mounted master/controller for the VIBE system

“Adding VIBE-LIVE to our VIBE tubes gives you the perfect lighting system for any gigging musician!”

Our 300mm x 150mm floor-mounted controller will control all your VIBE system tubes, plus much more.

With its clear 2.4” OLED display and 4 pedals, you can command your lightshow, the way you want, and just when you need it.

VIBE-LIVE incorporates many of the features that exist in the VIBE tube range, with the addition of the following:

• DMX in (when Device Mode is set to DMX-Macro)
• DMX out (to drive standard lighting, moving heads, etc)
• MIDI in & through (for when Device Mode is set to MIDI-Pixels)
• Dual Pixel data/power out (to drive a standard RGBW string of up to 300 pixels)
• Integral microphone, plus jack for external microphone (for improved bass response)
• Optional 9V battery control (for basic use only, not for pixel power)
• Blackout/Standby, ON, Strobe and Flash/Blinder pedals

If you want a bulk quantity of this product, please reach out to our sales team to discuss purchasing options.

Specifications

• Can drive up to 300 SKC6812RGB-NW Pixels (or other RGBW Pixels) 150 per A/B connection on pluggable screw connections)
• Fully integrated Dynamic Music Tracking algorithm
• Uninterrupted audio sampling rate: 22kHz
• Maximum audio response time: ~23ms
• Typical pixel update rate: ~44hz
• Number of programs: 33
• Number of program variants: 256
• Number of palettes: 16
• VIBE Communications: 52 byte proprietary broadcast packet at 2.4GHz
• Wi-Fi Communications : 802.11b/g/n, bit rate: 802.11n up to 150 Mbps
• IR Communications : 38KHz carrier, 3bytes data packet from IR controller
• Display: 128×64 2.4” White OLED
• Navigation button: 4-way, plus enter
• IR Remote controls: 16 preset colours, brightness up/down, on/off
• Foot pedal control: Blackout/Standby, ON, Strobe, Flash/Blinder, standby colour select
• Powered either from USB, 5V input, or 9V battery

Parts Supplied

• VIBE-LIVE
• PSU-5V-3A
• VIBE-RC
• VIBE Quick Start Guide

Display Menu

• The OLED display has been carefully mapped to allow a clean operating menu.
• The device mode is readily viewable, and any changes are updated instantly.
• The display menu is operated by the 4-way navigation joystick situated to the right of the display, with up/down/left/right/enter actions.
• Depending on the Device Mode, the menus will become context sensitive to ensure a clean menu structure.

Connectors & Power

• 5mm x 2.5mm female barrel power socket for connection to a PSU-5V-4A power supply, which is the power source when using the Pixel Data/Power outputs.
• USB-C connection used primarily for Firmware upgrades.
• DMX-in: a 5-pin male XLR connector is used when the device is in “XLR-DMX-Pixel” mode. This will take a few channels of DMX and use that as priority when selecting programs, variations, and colours.
• DMX-out: a 5-pin female XLR connector that is used to output DMX512 data.

Product Documents

• VIBE System Brochure PDF
• VIBE LIVE Quick Start Guide PDF
• VIBE LIVE User Guide PDF

RELATED PRODUCTS

• VIBE-100
• VIBE-200
• VIBE-300