Pro-ONE Firmware Update Information
To update the firmware on your Pro-ONE, please download and unzip the firmware update zip file.
- IMPORTANT: Please ensure you plug the Pro-ONE directly into your PC/Laptop using a quality USB-A to USB-Mini cable (do not use a USB Hub).
- You can run the updater by first plugging the Pro-ONE in via USB to a Windows machine, then double-clicking the “Pro-ONE_vx.xx FIRMWARE.bat” file.
- Then type in the suggested ‘com port’ and press ENTER.
- The firmware should automatically upload and reboot the Pro-ONE once complete.
- You can check the update is successful by accessing the WebUI and seeing the firmware version written at the bottom of the page.
Download the latest firmware Pro-ONE_v2.00 FIRMWARE.zip here.
Release Notes:
2.00 (14/06/2025) Added Hybrid Modes to allow Pixel and DMX to be output simultaneously.
Revised how ‘Extended’ mode is addressed. Added Pro-ONE Network. Added configuration save-load slots. Improved DMX output. Improved FPS estimator.
1.03 (23/11/23) Fixed bug where Universe Size 9 could not be set. Fixed a bug where selecting 32U mode would keep rebooting the device.
1.02 (11/11/23) Fixed issue where Pixel Count could be set to zero, the minimum is one.
1.01 (08/11/23) Fixed bug where WS28xx lowest brightness level would produce flickers.
Download older firmware versions
Pro-ONE_v1.00 FIRMWARE.zip
Pro-ONE_v1.03 FIRMWARE.zip
If you have any issues, don’t hesitate to get in touch with us at sales@smartshow.lighting or use our contact page.